System Guides / Approved Materials
Documents are subject to change and new documents may be added at any point in time. Please be sure to check back for updates prior to starting a new project. To sign up for our E-news and periodic updates, subscribe here.
CAD Details and Technical Bulletins are to be considered as part of Laminators' Installation Guides and are required to install our systems properly.
Additional resources and videos can be found on our YouTube page.
Laminators Approved Materials
Effective July 26, 2021
This document contains information that supplements content in our current system guides
1-Piece, Tight-Fit Molding System Guide
Effective October 5, 2020
The new and improved Back-Drained and Ventilated 1-Piece, Tight-Fit Molding installation system offers a traditional yet high-tech appearance at an affordable cost. Aluminum moldings used to encapsulate panel edges are available in both flat and reveal styles, providing two different aesthetic options for installation. The new back-drained and ventilated sub-framing provides enhanced system performance through improved moisture management and increased ventilation.
When combined with our new Omega CI (optional component), the installation system offers an effective solution for veneer installations over continuous insulation while balancing thermal performance, water management, and fire resistance code requirements.
Clip & Caulk System Guide
Effective October 5, 2020
The new and improved Back-Drained and Ventilated Clip & Caulk installation system provides the traditional look of a shop-fabricated wet seal system without the added hassle and cost of panel fabrication. The back-drained and ventilated sub-framing provides enhanced system performance through improved moisture management and increased ventilation.
When combined with Omega CI (optional component), the installation system offers an effective solution for veneer installations over continuous insulation while balancing thermal performance, water management, and fire resistance code requirements.
Rout & Return Installation Guide
Effective October 26, 2016
Prefabricated panels can be panned on-site using standard carpentry tools to give a solid, finished appearance.
Dry Seal Installation Guide
Effective January 25, 2021
Create a high-performance, pressure-equalized wall system that reduces moisture-related issues in the wall cavity.
Omega-Flex System Guide
Effective March 23, 2021
Omega-Flex panels are intended for use on curved substrates with a radius ranging from 17' down to 8'. Panels are installed using Laminators' aluminum moldings.